What is a top pull front derailleur?

Some front derailleurs are designed to work with cables which pull upwards from above the derailleur, and some work with cables which pull downwards from below. They are called top-pull and bottom-pull respectively. … Locate the cable stop or routing on your bike frame through which the derailleur cable will run.

What is the difference between top pull and bottom pull derailleur?

Traditional front derailers are bottom-pull, operated by a cable running up from the bottom bracket area to the derailer. Top-pull derailers are operated by a cable running down from above.

What is the top of the line Shimano derailleur?

Comparison Table Best MTB Derailleur

Name Supports Single Front Rating
Shimano XTR Di2 RD-M9050 Yes 4.6
SRAM XX1 Eagle Yes 5.0
Shimano M640 Zee Yes 4.4
Shimano Deore XT RD-M786 SGS Yes 4.9

How do you install a front pull top derailleur?

How do I identify my Shimano front derailleur?

How do I identify a Shimano front derailleur?

Looking at Shimano’s range, Side Swing front derailleurs are currently coded by the last two digits as ’20’ ie: Shimano XTR FD-9020 and XT FD-8020.

Can I use a 10-speed front derailleur on a 9 speed?

As long as your front derailleur matches the number of gears on your front chain ring (2 or 3) you should be okay. That being said, you may run into issues with different manufacturers or groupsets working well together.

Can I put any derailleur on my bike?

A derailleur for your mountain bike should match the specifications on the original derailleur. That is, while it doesn’t need to be the same model of derailleur, it does need to be the same brand, in almost every case. It also needs to match the number of gears, or have more intended.

Will a 10-speed front derailleur work with 11 speed?

And it will work even better if you put new, 11-speed chainrings on it. I am thinking about upgrading my Ultegra 10-speed triple system to 11-speed. Can I keep the 10-speed front chain rings and crank on the 11-speed system?

What is the difference between short cage and medium cage derailleur?

The only difference between the two is the amount of chain slack they can take up. In theory, the fact that the short RDs have a shorter cage means that the amount of movement is less due to the lower angle and lower flex.

What is the order of Shimano groupsets?

Guide To Shimano Road & MTB Groupsets

  • Quick Links. Road Bike Groupsets Mountain Bike Groupsets Other Shimano Groupsets. …
  • Dura-Ace/Dura-Ace Di2. At the top of the pile is Dura-Ace, the original 11-speed and Shimano’s premium groupset. …
  • Ultegra/Ultegra Di2. …
  • 105. …
  • Tiagra. …
  • Sora. …
  • Claris. …
  • Deore XT/Deore XT Di2.

Which is better Shimano Altus or tourney?

Shimano Altus and Acera Acera Altus only comes in a 3x system in other words, with a triple or 3-ring chainring at the crankset. … The shifting capabilities of Acera Altus are noticeably better than that of Tourney it might still be a bit loud and clumsy, but it’s much more reliable and precise.

How do you fit a Shimano front derailleur?

How do you replace a Shimano front derailleur cable?

How do you install a Shimano front derailleur?

How do I know what derailleur I have?

What model is my Shimano derailleur?

Shimano stamps the rear derailleur model number on the underside/lower plate of the parallelogram.

How do you tell which Shimano 105 I have?

The shifter can be identified by model number, which is stamped on the plastic perch (under the rubber hood).

How do I know what size front derailleur I have?

Do shifters and derailleurs have to match?

The shifters and derailleurs need to match. Front: Sram and Shimano work with eachother on the front derailleur.

What size derailleur do I need?

your drivetrain capacity is the maximum amount of slack chain the rear derailleur cage can handle. The more potential slack, the bigger a derailleur cage you need. … Meanwhile, if you are running a modern 1×11 or even a 1×12 with a very large top sprocket, then a medium cage derailleur is probably the way to go.

Will a 9 speed front derailleur work with 8 speed?

In practice, they are interchangeable. You can use a 9 speed FD on an 8 speed crank.

Will a 10 speed shifter work with a 9 speed cassette?

A 10-speed Shimano shifter isn’t compatible with a 9-speed SRAM rear derailleur either because the Shimano shifter has a different cable pull. There are SRAM rear derailleurs compatible with Shimano’s stuff, but they aren’t designed for 9-speeds.

Can I use 11 speed shifter with 9 speed cassette?

Hi is it possible to use an 11 speed derailleur with a 9 speed cassette? Yep with friction shifters it’ll be fine.

Are derailleur hangers universal?

The Universal Hanger should be in everyone’s saddlebags. If your existing derailleur hanger busts, strips or is totally wonky, the Universal Hanger replaces the drive-side nut on your quick-release skewer so you can get the majority of your gear range back. Absolutely essential for touring or epic mountain biking.

Which Shimano derailleurs have a clutch?

How much does it cost to replace a derailleur?

If you take your MTB into a local bike shop the average price to replace a rear derailleur is going to be $110. If you DIY replacing a derailleur will cost about $50 (plus your time) This price will depend a lot on the actual derailleur needed. Usually a bike shop will also take care of other problems.

Are SRAM and Shimano interchangeable?

Compatibility between different drivetrains SRAM and Shimano cassettes, on either road or mountain bike, are interchangeable with each other as the spacing is the same between the sprockets.

Can you mix and match Shimano components?

It is possible to mix and match as long as you get components from the same generation. For example: 9000 Dura Ace, 6800 Ultegra, and 5800 105 are all cross compatible. Each have 11-speeds in the rear, use the same cable pull per shift and use the same front derailleur design.

What is the difference between 10 speed and 11 speed?

10 speed chains are slightly different from 11 speed. 10 speed chainrings are slightly different from 11 speed, but in most cases, you can simply swap out the chainrings instead of buying a whole new crankset. Some rear hub cassette bodies are only designed to accomodate up to a 10 speed cassette.