304 North Cardinal St.
Dorchester Center, MA 02124
304 North Cardinal St.
Dorchester Center, MA 02124
The best alternative method on how to get a high gloss finish on the wood is by using a varnish or lacquer. You can easily spray lacquer but if you are using a varnish then you have a choice between both brushing and spraying. Though, you will be more comfortable with spraying as it takes less time and is an easy job.
If you need to protect the surface, the best clear coat for wood may be polyurethane.
Mix 1 cup Olive Oil and 1/2 cup white vinegar . Pour this home made polish on a soft piece of cloth and gently rub it on the furniture in circular motion. If the wood looks dry, let the mix set on the surface and then pour some more polish on the cloth and rub the dull surface to shiny one.
Polyurethane wood finish is used to coat surfaces, protecting them from scratches and helping to resist water damage. Learning how to apply polyurethane can give wood furniture and flooring a glossy, smooth finish while improving its durability.
If you want to be environmental-friendly and look for a more natural look, then shellac is a suitable choice. If, however, you need a modernistic look to your wood and you want a clear finish, then polyurethane varnish will satisfy your requirements.
Despite being available in variances, polyurethane is more durable. It is thick and leaves a strong coating. Lacquer is thin and penetrates the wood surface. It is also durable but susceptible to scratches and discoloration after some time.
Most of the time, a layer (or several layers) of the polyurethane causes the shiniest and glass-like appearance on the wood finish. Adding a layer of the polyurethane coat onto the wood piece is the easiest way to make the wood shiny and glossy.
How to Get a Mirror Finish on Wood
The Best Furniture Polishes to Make Every Surface Shine
High gloss paint is known for being super shiny and light reflecting, giving it an almost mirror-like look. Most designers would consider it a specialty finish, as it creates such a brilliant sheen. … So you can the use same color in a different sheen for the majority of the wall, and then add a high gloss accent.
Depending on the thickness of the paint you can either use some Ultimate Aluminium Oxide Fine Paper and a Seriously Good Cork Block to gently sand away the top layer of gloss. Alternatively, you can use a paint stripping solution, and dab this onto the old paint to successfully remove the gloss.
The steps to glossing a door go as follows:
For best results, apply at least two coats of polyurethane. When working on floors, tables, chairs, and furniture that will be used often, apply at least three coats. If you are using water-based polyurethane, you can apply up to four or five coats on floors and sheds.
Do not apply too much polyurethane in one coat, as this can result in the wood grain rising to the surface. You will not need to sand the surface between coats of water-based polyurethane, but it is always best to do it anyway. You will need at least three coats for a surface that is lightly used.
While polyurethane is water- or oil-based plastic resin, varnish is older and made from resins, oils, and solvents. Because of the higher ratio of solids, varnish is less susceptible to ultraviolet light damage. … This finish gives a more tinted color when applied and requires more coats than polyurethane.
While it is similar to varnish in terms of application and appearance, polyurethane is generally harder and more abuse resistant, which means it is commonly used for sealing wood floors. Unfortunately, polyurethane is less flexible than varnish, so it may not be the best choice to use on wood pieces that move or flex.
Shellac: This finish is virtually a natural product that creates a lustrous, mid-gloss sheen with a golden tint.
It is arguably the hardest & most durable of all topcoats. And in recent decades polyurethane, or poly (as I’ll call it for short), has become the go to topcoat finish for woodworkers everywhere. Nearly every finish & topcoat manufacturer has come up with a poly product for sale.
Most clear finishes are applied with a brush, working in the direction of the grain of the wood. After it dries, sand lightly. Then remove all the sanding dust and apply a second coat. For added durability, a third coat can be applied.
Oil-based polyurethane is very durable, making it the best choice for refinishing wooden floors or furniture that gets a lot of use, such as a table. … Polycrylic is a water-based product that is far less smelly and toxic than either type of polyurethane, making it easier to work with.
Polyurethane. Oil-based polyurethane is a fairly durable clear coat. It adds a slight color tone and will bring out the richness of wood which makes this oil-based product great for stained wood including hardwood floors.
Although lacquer is a durable finish, it does sustain scratches especially on tabletops. Most scratches aren’t difficult to level out with fresh lacquer, but you may have a problem matching the sheen of the area you repaired with the rest of the table.
Polyurethane, varnish, and lacquer are tried-and-true sealants with excellent waterproofing properties. They’re either brushed or sprayed onto clean, sanded wood and then allowed to dry completely, prior to the piece being lightly re-sanded and recoated.
If you want a more refined finish, sand the area by hand with 400-grit wet/dry sandpaper, lubricated with plenty of water after the last coat. Finish by buffing the area with 0000 steel wool. You’ll get the best possible finish by using a random orbit sander over top of a super-fine 3M rubbing pad.