Can you hang back tab curtains with hooks?

Many drapes come with back tabs where you can clip the rings, or you can pinch the fabric to create pleats. … When using drapery hooks, you have to make sure the hook does not go through to the front of the drape. You only want it to grab the back tab or lining. Thread the hole in the ring through the hook to attach.

What are hidden back tabs on curtains?

Hidden tab curtains, also called back tab curtains, have tabs sewn onto the back of the curtain. Neither is visible from the front because the rod slips through the tab. This creates an elegant, clean line by giving the illusion of the curtain floating in space.

How do you hide tab top curtains?

Do back tab curtains slide easily?

Look at Your Room Decor Opening and closing tabbed curtains is a bit more difficult than with rings, as rings slide easily along the rod. With rings, the upper part of the window casing or trim is usually visible because they hang down from the rod.

What are the curtains with hooks called?

What hooks do you need for Pinch Pleat Curtains? These are the curtains that have the pleats sewn into the top. They come as either double or triple pleated curtains, can be used on either a track system or on a rod/pole with rings both use the same type of hooks.

How do I make my curtains glide smoothly?

How are back tab curtains measured?

Measure from the top of a tab to the bottom hem for the overall curtain length. Measure from the top of the tab to the top of the curtain for the finished tab length. Multiply the tab length by 2, subtract 2, and divide the result by 3.14 for the maximum diameter rod you can use for the tabs.

What are the different types of curtain tops?

They are:

  • Rod Pocket(Pole Pocket) A pocket is sewn across the top of the curtain panel through which the curtain rod is inserted. …
  • Pencil Pleat. It is common and classic, creating a simple and casual look. …
  • Versatile Pleat. …
  • Tab Top. …
  • Back Tab(Concealed Tab Top) …
  • Double Box Pleat. …
  • Triple Box Pleat. …
  • Single Pinch Pleat.

How do you attach blackout lining to tab top curtains?

How To Add Blackout Lining To Existing Curtains

  1. Remove the curtains from the pole and lay face down on a flat surface. …
  2. Insert the curtain hooks into the header tape pockets of the lining. …
  3. Hang the curtains, and adjust the placement of the curtain hooks on header tape for improved positioning and drape.

How far apart are tabs on curtains?

The number of tabs to place at the top, and how far apart they should be, is not set in stone, but most tabs are set eight inches apart.

What are slot top net curtains?

A Slot Top heading is supplied as standard and is the perfect choice for wires or net rods which are simply slotted through the opening. This offers an informal, relaxed style. No extra charge.

How do you make your own self lined curtains?

What does Rod Pocket mean?

Rod pocket means that the rod will go through the pocket on the back of the curtain and back tab means that there are also tabs in the back of the curtain if you wish to hang it like that. … If you hang through the rod pocket, it may not be as easy to move the curtain as it would be if you hung through the back tabs.

How do you make tab top curtains slide easier?

There are several things you can do to help your curtains slide more easily:

  1. Dry silicone spray.
  2. Curtain slide tape.
  3. Measuring tape.
  4. Custom-cut curtain rod.

How wide should tab top curtains be?

The width of the tabs will usually be around 1 to 2. For a 2 width, start by cutting out pieces with a 5 width (and the length you decided on in Step 1). You can also cut a continuous length at a 5 width and sew the long edges together. Either way, turn your fabric right side out and press it flat.

What are curtains without grommets called?

Rod pocket curtains, also called pole top or casement curtains, are a classic, and classy, way to hang drapery. A casing sewn onto the back of the curtain panel at the top allows the rod to slip through unseen. Panels bunch in gathers on the rod for a soft look with clean lines.

What is a ripple fold drapery?

WHAT ARE RIPPLEFOLD CURTAINS? Ripple fold style curtains are curtains that have a consistent s- curve rippling across the span of the track. The ripples are created by carriers corded together to create that consistent wave. These styles are seen often in hospitality installations as hotels and banquet rooms.

What are the two types of curtains?

Types of Curtains

  • Rod Pocket Curtains. Rod Pocket or Casement curtains have the top panel sewn to form a pocket. …
  • Eyelet/Grommet Curtains. Grommet or eyelet curtains are the most common curtain type. …
  • Tab-Top Curtains. …
  • Pleated Curtains. …
  • Window Scarf. …
  • Cafe Curtains. …
  • Sheer Curtains. …
  • Blackout Curtains.

What is a drapery baton?

There is an element of Hospitality and Healthcare Drapery that is rather essential but often times overlooked. That item is the drapery baton. … Its construction utilizes a plastic stiffener and a connection with both the drapery and the master carrier, resulting in a reinforced draw.

How do you hide curtain ring clips?

HERE’S THE QUICK TIP ON HOW TO HIDE CURTAIN RING CLIPS: just pinch the back of the curtains and clip the rings an inch or so down from the top.

Can you use curtain clips on rod pocket curtains?

Curtain ring clips work the best with flat panels, but they also work with rod pocket curtains. Flatten the pocket, and secure the clips to the top edge of the panel. Alternatively, use clips to hang Bohemian tapestries, swatches of fun fabric hemmed along the edges, or even re-purposed sheets over your windows.

How do I know what size curtains to buy?

Measure the width of your window. Add 12 inches to each side, 24 inches total. Take the total number (width plus the number you added to each side) and divide that number by how many drapery panels you want in the window.

What size curtains do I need for a 5ft window?

A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.

Does curtain length include tabs?

LENGTH: The length of rod-pocket curtains is the distance from the top of the rod pocket to the bottom of the hem. It does not include ruffles or other decorative elements above the pocket. … The length of tab-top curtains is the distance from the top of the tab to the bottom of the hem.

What are four different tops on panels for hanging draperies?

Here are four of the most popular curtain and drapery styles to help you identify what you need for your home.

  • 01 of 04. Panels with Rings. Ring-top panels are very easy to open and close. …
  • 02 of 04. Rod-Pocket Panels. Rod pocket drape panels. …
  • 03 of 04. Pleated Panels. …
  • 04 of 04. Tab-Top Panels.

Why are eyelet curtains so popular?

Why People Love Eyelet Curtains The grommets allow the curtain to glide almost effortlessly along the rod, making opening and closing the curtains quick and easy. Eyelet curtains hang neatly whether open or closed, and they are available in a wide variety of fabrics, from thin and sheer to thick and blockout.

What is eyelet curtains?

Eyelet curtains or Ring Top curtains are a contemporary curtain heading for use with curtain poles. Eyelet heading gives large even soft pleats and are so called because they have metal rings at the top of the curtain in place of a normal header tape.

Can you sew blackout lining to curtains?

Sew the blackout lining along the same stitch marks as the curtains. Use the same color thread as the store-bought curtains. If you don’t go along the same stitch marks as the curtains, that’s okay. … But blackout lining won’t fray so it’s great fabric to just cut and sew into place.

How do you sew blackout lining into existing curtains?

HOW TO USE THE BLACK OUT EYELET ON EXISTING CURTAINS

  1. Purchase the Stuart Graham black out lining eyelet curtain in the correct size. …
  2. Lay your existing ready-made curtain face down on a clean, flat surface. …
  3. Match up the eyelets of both products. …
  4. Thread a single curtain pole through both eyelets as usual.
  5. VOILA! …
  6. TOP TIP.

How do you attach blackout lining to existing curtains?